Chicken Feed
Pellet Mill Machine 220V
In addition to the
above pressure plate specifications, we also have 10MM and 12MM.But
12MM needs special customization.
Description
1.When using, it should be noted that there should be no foreign
matter such as stones and ironblocks in the raw materials.After the
pellet machine has been working continuously for morethan ten
shifts, the pressure roller oil hole, the universal joint oil hole,
and the linkage shaft oilhole need to be filled with
high-temperature lubricating grease to make the pressure roller
Goodworking performance and extended bearing life.
2.During granulation, it is strictly forbidden for the pressure
roller to contact with the templateto run idly, and the continuous
feeding can not be interrupted.At the same time, the pressureroller
shaft nut is locked to avoid loosening and damaging the spindle
keyway.
3.When granulating, there is no granulation, no discharge, the
template should be removed, andafter opening one by one, some fiber
feed can be added appropriately to restart the granulation4.Always
check the tightness of the screws in each part of the machine. If
there is oil leakage inthe gearbox, replace the oil seals in time,
and check whether the bearings in the machine headare short of oil.
5.When the pellet machine is working, do not reach into the feeding
port with your hands. Ifnecessary, use wooden sticks to help feed
the pellets.
6.Before turning on the machine, it is necessary to add less
material before turning on the
machine. When shutting down, leave a small amount of feed in the
machine to prevent the pressroller of the machine from contacting
the template from idling.
7.If the machine is stuck in operation, stop it immediately, press
the pressure roller until thebolt is flat, and then restart the
machine.
8.Each time the work is completed, the adjusting pressure roller
bolts must be loosened.
Usage and specification
1: It applies to chicken industry.
2:Corn particles can be put into the
machine directly. The feed processed by the machine is smooth and
has moderate hardness. The temperature-change during the process is
slight so the nutrition can be contained very well.
3:The practical’s diameter of the
holes can be divided into: Φ2, Φ2.5, Φ3, Φ3.5, Φ4, Φ5, Φ6, Φ7, Φ8,
Φ10,Φ12
4:The microorganism and parasite can
be killed during the process by extrusion.
Operation
1: Add oil into gearbox before start.
2:Double-check the belt and the screws
before operation.
3:Clean up the rest after use to
prevent damage to the machine.
Notice
1, Iron or stones cannot be put into the
griller.
2:Check the elasticity of the belt, and the
bearing frequently. Add oil in time when it needs to.
Item include(239226)
1*Chicken Feed
Pellet Mill Machine 220V
Shipping &
Handling Details
Default Shipping Cost or
Free Shipping Information:
▲
Default
shipping cost or free shipping service is only for the lower 48
United States by UPS Ground or USPS. Other areas or needs other
shipping ways, please contact us.
▲
Buyers
from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska,
Hawaii, PO Boxes, APO/FPO addresses or other countries/areas,
there
WILL be extra shipping costs, please contact us for more detailed
information.
▲
Please
make sure your address is valid for both UPS and USPS services.
Any costs incurred because of incorrect or undeliverable address
should be undertaken by buyer.
Handling
Time:
Shipping
is usually made in 1-3 business days after payments cleared. Orders
are processed from Monday-Friday; Not on the weekends & public
holidays.
Sales tax
/ Customs duties:
Any
sales taxes or Customs duties are not included. If came out, they
must be undertaken by the buyer. Sales Tax of 8% will be applied
for orders shipped within the state of California.
Damage In
Shipping:
Email
or call us First! We will work with you to get the case resolved
in the fastest method.
Return / Refund
If you are not 100% happy with
your purchase, please contact Us. Please don’t directly opened a
request or case without informing us, or else, we will do some
discounts on the warranty and other sales-services later on. Hope
for your understanding.
Returns & Exchanges
▲
All
returns must be made within 14 days of delivery date. Items must be
in new, unused condition, with all original materials included
with the shipment. A partial refund may be applied for opened or
damaged items, depending on the condition.
▲
Items
returned under the buyer’s remorse: The return shipping fee must
be covered by the buyer; The original shipping cost will also be
deducted from the refund. 15% restocking fee of the items purchase
price will be charged.
▲
Returns
that are the result of our seller’s error: Buyer will receive a
full refund of the item as well as shipping charges
▲
All
returns require a RA (Return Authorization) number that will be
given by our seller. Please contact with us at first for more
details.
Defective & Damaged Products
▲
If
product was received damaged or not as described, please send us
some pictures or videos, so we could well understand your problem,
then solve them for you ASAP. Besides, it’s much helpful for us to
claim with UPS, remind our related department to pay much more
attention to packaging later on. Hope for your understanding.
▲
Replacement
or refund of defective or damaged products can only be returned in
exchange for the exact same product, or else, the purchase price
will be refunded back to your original payment method.
▲
If
an item is received damaged, customer service must be contacted
within 7 days of receiving your item. All returns require a RA
(Return Authorization) number as above.
Payment
PayPal:
PayPal
preferred only with a confirmed address. We want you to feel
secure in your purchase. Keep everything within PayPal and
eBay protects both buyer and seller.
eCheck Issues:
Payments
via eCheck do not clear immediately. Usually you will wait 5-7
days after checkout for it to clear. Then we will arrange
shipments for you.
Warranty & Feedback
▲
6
months’ warranty for the machines, not for the consumables. We
stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical
support from us with low cost.
▲
Any
warranty shipping cost to us is responsible by buyer.
▲
Any
shipping cost to buyer is responsible by the seller.
▲
WeWe
committee to the customer satisfaction and want to bring you the
best purchase experience. If there is any problems, please contact
us ASAP. If not, please leave us a positive feedback as it’s very
important for us. Thanks very much.
On Nov 4, 2022 at 01:25:16 PDT, seller added the following information:
Zmdi-facebook
Zmdi-twitter
Zmdi-youtube-play
Zmdi-instagram